Ask the Question Forum Index Ask the Question
FREE question and answer forums in a variety of subjects
 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

guttering in bits! Damp interior walls

 
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Builder
Author Message
fitzroy_boy



Joined: 13 Nov 2006
Posts: 1
Location: london

PostPosted: Mon Nov 13, 2006 11:51 pm    Post subject: guttering in bits! Damp interior walls Reply with quote

Hello there all! Have just brought a house with bad damp which i think is coming from bad guttering. I've been up in the attic and the roof seems ok from inside and on the outside. the house is a 3 storey house, on the top floor the bedrom is not 2 bad but on the floor below the plaster has blown and is coming off the wall in big lumps. Also has mould and what have you. I'm going to renew the guttering this weekend and take the plaster off and allow brick work to dry, the outside wall is rendered and i take it i will have to take that off also. Does this sound like the right course of action? The render at other points has cracks appearing, the building does not have subsidance, but is victorian so i know there is of course going to be so movement. does the place need rerendering or just touching up?Any other tips? Thank you for taking the time to read all!
Back to top
thescruff
Moderator


Joined: 03 May 2003
Posts: 4400
Location: Bath

PostPosted: Thu Dec 14, 2006 10:24 pm    Post subject: Reply with quote

You can buy a colourless liquid to paint on the outside to seal the wall.

Looks and smells much like parafin,
Back to top
Jen27



Joined: 01 Jun 2007
Posts: 3
Location: Oxon

PostPosted: Wed Jun 06, 2007 12:08 pm    Post subject: Reply with quote

We've just moved house and are having a similar prob.

Had a builder out. It may be worth checking what type of render it is. If the property is old, it really needs to be lime rendered. Ours is cement, which means the walls can't breathe and the only way for moisture to get out of the wall is to ingress.

We're having the cement render taken off and replaced with hydraulic lime - should sort the problem. Don't know cost yet though Confused

Sealing the render may only make the problem worse?
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Builder All times are GMT
Page 1 of 1

 




Powered by phpBB © 2001, 2005 phpBB Group
Bad Credit Loan | Xbox Mod Chip | Personal Loans | Loans | Beijing Olympic