Ask the Question Forum Index Ask the Question
FREE question and answer forums in a variety of subjects
 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Restoring water prtessure to combi after removal of rad.

 
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber
Author Message
combo



Joined: 29 Sep 2006
Posts: 1
Location: Midlands
PostPosted: Fri Sep 29, 2006 7:22 pm    Post subject: Restoring water prtessure to combi after removal of rad. Reply with quote
Hi,

I removed a rad to allow for some plastering to be done. As soon as I did the heating stopped working. Rang a plumber who said to check the pressure guage. Sure enough its down to zero more or less. He said to increase it I had to refill the boiler and directed me to a flexible pipe under the boiler. Located such a pipe (silver) which links two copper pipes (one smaller bore than the other) - ok so far - but now I've twiddled and turned eveything that looks like it could be twiddled or turned and - nothing. What should I be looking for?

Any advice gratefully received

Thanks


Chris
Back to top
thescruff
Moderator


Joined: 03 May 2003
Posts: 4756
Location: Bath
PostPosted: Fri Sep 29, 2006 8:25 pm    Post subject: Reply with quote
There should be a little blue or red handle which you turn on.

But first the flexible hose should be connected.

A photo would help to id the right part.

What boiler make and model is it.

http://www.screwfix.com/app/sfd/cat/pro.jsp?id=30327&ts=65222
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber All times are GMT - 1 Hours
Page 1 of 1

 




Powered by phpBB © 2001, 2005 phpBB Group
Online Advertising | Loan | MPAA | Box Talk - The Television Forum | Xecuter 3 Mod Chip