Ask the Question

debbiem · Joined: 28 Nov 2005 Posts: 10 Location: wales

i have a computor and there is power i checked all leads but no picture on screen at all tried the monitor on friends screen but still would not come on do you know what this could mean many thanks debbie Question

vince knight · Posted: Tue Nov 29, 2005 7:16 am Post subject:

Internal fault on monitor, is it a standerd CRT or a flat screen?

Vince

debbiem · Joined: 28 Nov 2005 Posts: 10 Location: wales

thanks for repling it is a flat screen

vince knight · Posted: Tue Nov 29, 2005 9:29 pm Post subject:

have you checked the fuse in the plug?

debbiem · Joined: 28 Nov 2005 Posts: 10 Location: wales

there is power as lights are on but nothing appearing on the screen, i put my friends monitor to the harddrive machine nothing appeared on that screen either.

vince knight · Posted: Tue Nov 29, 2005 11:52 pm Post subject:

Have you pluged your monitor into her machine?

Vince

debbiem · Joined: 28 Nov 2005 Posts: 10 Location: wales

yes all set up correct but no picture still all power lights are on

vince knight · Posted: Wed Nov 30, 2005 12:05 am Post subject:

Then Im afraid it will have to got to a specialist as there is not alot you can do inside them without the correct gear+there are some very high voltages present.
Sorry I couldn't help further.

Vince

debbiem · Joined: 28 Nov 2005 Posts: 10 Location: wales

thank you for your help debbie

thescruff · Moderator Joined: 03 May 2003 Posts: 4660 Location: Bath

You say you put your monitor on you're friends machine and her monitor on your machine.

Try plugging you're friends monitor in your machine using her leads.

Next, and I don't know if this applies to your setup. I have a multi purpose monitor and it needs to be tuned into the pc, cctv, tv or video.

Your computor may not recognise another monitor without configuring it first.

I suspect an installation fault rather than an electrical one