 |
Ask the Question FREE question and answer forums in a variety of subjects
|
| Author |
Message |
steveb
Joined: 01 Feb 2003 Posts: 1
|
Posted: Sat Feb 01, 2003 11:39 am Post subject: Heating prob's |
|
|
Hello,
I would apprciate any advice you can give to the following problems, I have just replaced the motorised valve on my heating system (Danfoss HSA3) when I turn the programmer to the on position and turn the room thermostat on the valve starts comming across and then stops and clicks like an indicator and I have to pull it further for the heating to come on, any ideas as it is driving me nuts..
Thanks for your help
Steve Baker |
|
| Back to top |
|
 |
Ian Moderator
Joined: 18 Feb 2003 Posts: 32 Location: wigan
|
Posted: Tue Feb 18, 2003 7:19 pm Post subject: Re: Heating prob's |
|
|
| steveb wrote: | Hello,
I would apprciate any advice you can give to the following problems, I have just replaced the motorised valve on my heating system (Danfoss HSA3) when I turn the programmer to the on position and turn the room thermostat on the valve starts comming across and then stops and clicks like an indicator and I have to pull it further for the heating to come on, any ideas as it is driving me nuts..
Thanks for your help
Steve Baker |
try turning your cylinder thermostat down and see if this moves the valve all the way across, could be a wiring fault or of course a faulty motor[gearing not set in the wright posistion]  |
|
| Back to top |
|
 |
|
Powered by phpBB © 2001, 2005 phpBB Group
|