Ask the Question Forum Index Ask the Question
FREE question and answer forums in a variety of subjects
 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Expansion vessels - quick question!

 
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber
Author Message
c_a_stanley



Joined: 12 Dec 2002
Posts: 1
Location: Liverpool, UK
PostPosted: Thu Dec 12, 2002 3:40 pm    Post subject: Expansion vessels - quick question! Reply with quote
Hi all,
I'm just about to fit an unvented undersink water heater (10L) in my house. This involves the fitting of a small (0.5L) expansion vessel on the cold water feed pipe to this heater. My question is: do expansion vessels need to be mounted vertically above the pipe or can they be fixed at any angle (or even hanging below the pipe on which they are attached)? I only ask because space is a bit tight in there!

Any help would be much appreciated,
Chris
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber All times are GMT
Page 1 of 1

 




Powered by phpBB © 2001, 2005 phpBB Group
Final Fantasy Soundtracks | Cheap Car Insurance | Online Loans | Cheap Flights | Salvage Title Cars