Ask the Question Forum Index Ask the Question
FREE question and answer forums in a variety of subjects
 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

fitting a scale inhibitor

 
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber
Author Message
Maverick747



Joined: 22 Apr 2008
Posts: 3
Location: lincs
PostPosted: Tue Apr 22, 2008 2:12 pm    Post subject: fitting a scale inhibitor Reply with quote
a crack has developed in my inhibitor so it needs to be changed
does the central heating system need to be drained down
or just the mains water turned off???
any help appreciated
Back to top
thescruff
Moderator


Joined: 03 May 2003
Posts: 4149
Location: Bath
PostPosted: Tue Apr 22, 2008 2:25 pm    Post subject: Reply with quote
If it's fitted on the mains water pipe going into the boiler then all you need to turn off is the main stopcock

If you turn the cold valve off on the boiler as well it will stop any backflow, keeps you a little drier.
Back to top
Maverick747



Joined: 22 Apr 2008
Posts: 3
Location: lincs
PostPosted: Fri Apr 25, 2008 10:30 am    Post subject: Reply with quote
thanks for advice..all done now Wink

the inhibitor is located close to the boiler
would you recommend fitting one near to the stopcock
as it enters the house
would this improve drinking water quality?????
if so which type would be suitable
tia

Mav.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber All times are GMT
Page 1 of 1

 




Powered by phpBB © 2001, 2005 phpBB Group
Dubai Property | Flights | Car Insurance | Flights | Car Insurance