Ask the Question Forum Index Ask the Question
FREE question and answer forums in a variety of subjects
 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

TRV cover replacement?

 
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber
Author Message
Orange_Octopus



Joined: 30 Dec 2005
Posts: 7
Location: Essex
PostPosted: Wed Apr 16, 2008 10:12 am    Post subject: TRV cover replacement? Reply with quote
Hi!

I've just moved into a house and the radiators have all got lovely new-ish (well five / ten years old but who's counting) looking TRVs on them.

Problem is in the bedroom one of the covers appears to be missing and the radiator is now on full blast all the time - not very energy saving! I was just going to buy a new TRV and use the cover over the top of the existing mechanism but do they need to be the same brand? At the moment all that is there is a thin "pole" about 60mm high and 1mm in diameter sticking up from the place I would expect the TRV to be. I've never looked inside a thermostat so I've no idea if that's standard or unusual - any expert opinions most appreciated!
Thanks
Back to top
AlanE
Moderator


Joined: 29 Jun 2003
Posts: 1333
Location: Colchester Essex
PostPosted: Wed Apr 16, 2008 12:32 pm    Post subject: Reply with quote
That description just about covers every valve made!

Is there a makers name on the others otherwise a picture of one of them is needed. Yes replacement head MUST be the same make 99.9% of the time.

Might be simpler, and cheaper, to just replace the valve complete.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Plumber All times are GMT - 1 Hours
Page 1 of 1

 




Powered by phpBB © 2001, 2005 phpBB Group
Nora Roberts | Credit Card Application | Credit Cards | Mobile Phones | Debt Consolidation