Ask the Question Forum Index Ask the Question
FREE question and answer forums in a variety of subjects
 
 FAQFAQ   SearchSearch   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

meter base alteration

 
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Electrician
Author Message
johnporter



Joined: 13 Feb 2008
Posts: 1
Location: Ohio
PostPosted: Wed Feb 13, 2008 1:30 am    Post subject: meter base alteration Reply with quote
Siemens Meter base alternate use. I have a brand new Siemens meter base # UAS877-PPZA it is designed for under ground connection from the bottom. I would like to use it to make an overhead connection of a new service to our new riding arena. Can I just come out of the side or bottom with a 90 degree sweep or elbow and take it up the mast for over head hook up? The base is brand new but is missing tow of the clamp connectors for the hot or input wires do you have any idea where I could find just these two small clamps with screws? Thank you so much John
Back to top
b
Moderator


Joined: 31 Aug 2004
Posts: 301
Location: michigan
PostPosted: Fri Feb 15, 2008 12:08 pm    Post subject: Reply with quote
In Michigan you can go to Edison and they will give you a meter box. Don't know how it works in Ohio... but if you can get it free, use the right configuration and get all the hardware... a better route.
B
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Ask the Question Forum Index -> Ask the Electrician All times are GMT
Page 1 of 1

 




Powered by phpBB © 2001, 2005 phpBB Group
Free Ringtone | American Flags | Free Advertising | Car Insurance | Balance Transfer Credit Cards