Ask the Question

c.dubber · Joined: 15 Mar 2008 Posts: 3 Location: Reading

I have a Myson Lo line Fan Convector Model 19-15. It heats the room (25 by 12 feet) well, but the thermostat makes the convector cycle on and off every 5-30 seconds, once it has reached the temperature set.
Is this a concern? If so how do you correct it? It's just irritating.
We have 5 other normal radiators in the circuit, with another thermostat in the hall.

thescruff · Moderator Joined: 03 May 2003 Posts: 4419 Location: Bath

have you cleaned the filter

c.dubber · Joined: 15 Mar 2008 Posts: 3 Location: Reading

[quote="thescruff"]have you cleaned the filter[/quote]

The filter has been cleaned regularly since installation in Nov. 2007.
C.Dubber

thescruff · Moderator Joined: 03 May 2003 Posts: 4419 Location: Bath

It shouldn't cycle on and off that much unless its in a draught.

Maybe the stat has gone, give Myson a call

c.dubber · Joined: 15 Mar 2008 Posts: 3 Location: Reading

[quote="thescruff"]It shouldn't cycle on and off that much unless its in a draught.

Maybe the stat has gone, give Myson a call[/quote]

Thanks for the advice. There is no draft, but I will contact Myson re-the thermostat as this would seem very logical. They have sent an engineer twice under guarantee, but unfortunately they use outside engineers, who were not familier with the convector.
Thanks again,
C.Dubber