| Author |
Message |
DW89
Joined: 06 Oct 2003 Posts: 49 Location: Nottinghamshire
|
Posted: Wed Jan 28, 2004 10:01 am Post subject: Installing new boiler....new traditional or combi? |
|
|
All,
I am currently looking into renovating a property which had a knackered traditional gas boiler.
What would be your suggestions as to upgrading it? Should I replace the existing boiler with a newer, more effective boiler or would you do away with it all and start from scratch with a combi? Any particular combi to be recommended/any to keep away from? What are the plusses/minuses of these? If I put a combi in would it be an idea to replace all the old pipework due to the pressure increases or could this be left? Your advice is much appreciated.
Thanks in advance
Dave
TheScruff: If you are reading this...many thanks for all the pump advice it works a treat!! Will have to send you a pic...a Corgi installer was very impressed with my amateur effort! |
|
| Back to top |
|
 |
thescruff Moderator
Joined: 03 May 2003 Posts: 4680 Location: Bath
|
Posted: Wed Jan 28, 2004 11:24 am Post subject: |
|
|
Hi Dave,
All works well then, a picture would be nice.
Depends on how old the system is and the extent of the renovations, is it for let or personal use.
Over 20 years old I would consider replacing the lot and fitting an unvented cylinder with a condensing boiler as your existing would require major alteration to comply with the new regs, and would coming to the end of it's life anway.
Don't forget Gas work and unvented cylinders have to be fitted by an approved class of people and not recomended as DIY.
Whats the mains pressure/ supply like.
scruff |
|
| Back to top |
|
 |
DW89
Joined: 06 Oct 2003 Posts: 49 Location: Nottinghamshire
|
Posted: Wed Jan 28, 2004 11:44 am Post subject: |
|
|
Scruff,
Will try and get a pic up at the w/e
It's all pie in the sky at the moment but will be a reality soon enough...I hope!
Basically it'll be shot whatever it is as I'm looking at buying from Auction and am going on the basis that the whole system will need replacing. What exactly (not knowing the difference!) is a condensing boiler? Is this pressurised? i.e. I know 'unvented' means we're not talking header tanks etc (as with gravity) so what's the difference between gravity and what you are suggesting? Is this better than a combi? It's best to assume I know nothing!
Don't worry I wouldn't be fitting it! I have my limits!
Thanks
Dave  |
|
| Back to top |
|
 |
thescruff Moderator
Joined: 03 May 2003 Posts: 4680 Location: Bath
|
Posted: Wed Jan 28, 2004 1:43 pm Post subject: |
|
|
Condensing is supa efficient boiler that president Blair has told us we got to fit next year.
Combi's are ideal in a one bed flat with a shower.
The rules also say that you have to comply with Part L of the regs, which includes therostatic valves, room stat etc.
can do a drawing when you know more.
scruff |
|
| Back to top |
|
 |
DW89
Joined: 06 Oct 2003 Posts: 49 Location: Nottinghamshire
|
Posted: Thu Jan 29, 2004 6:57 am Post subject: |
|
|
I was hoping, before yesterday(!), that he wouldn't have anything to do with anything....bloody politicians!
Thanks or the info....soon as I know more I'll update the post.
Thanks
Dave  |
|
| Back to top |
|
 |
|